Availability: | |
---|---|
Quantity: | |
Light Source
Source: 228*3W cold white LEDs, 5700K
64*0.6W 3-in-1 RGB LEDs
Flicker free operation
for broadcast TV and FILM
Life Span: 50000H
The life span may vary depending on
several following factors but not limited to:
Environmental Conditions, Power/Voltage,
Usage Patterns (On-Off Cycling), Control,
and Dimming)
Optics
High resolution and precise optic system
Classic reflector for backlight
160°Projection angle
Strobe Effect
Variable speed multi directional
shutter/strobe effect
Strobe intensity adjustable 0-100%
Strobe duration adjustable 7-650ms
Strobe rate adjustable 0.289-16.67Hz
Dynamic Effect
Effect:
The fixture has two LED arrays:
• The Beam is a high-intensity array that gives powerful strobe and blinder effects
• The Aura gives RGB effects that light up the front of the fixture to complement or contrast with the output
from the Beam.
Strobe effects
The 3000 LED offers strobe effects from the Beam with variable flash rate, flash duration and
intensity. It also offers the following pre-programmed effects:
• Ramp up/down intensity modulation effects
• Random flashes
• Lightning – simulates the instantly recognizable ‘dirty’ flash of a lightning strike
• Spikes – low-intensity light output with high-intensity flashes.
Blinder effects
To obtain a continuous blinder effect, set flash duration to a long value and flash rate to a high frequency
value so that flashes ‘overlap’ and merge into continuous light output.
Aura RGB Color
Extended DMX mode gives control of the Aura. You can set Aura color with independent RGB control and
you can also control overall Aura intensity.
The four different dimming curve options available in the fixture’s control menus apply to both the Beam and
the Aura dimming curves.
Dimming System
0-100% Smooth linear LED dimming
4 Dimming curve modes, linear/square
law/Inv square law/S-curve
Control System
3/4/14 DMX channels USITT DMX-512
RDM available
(Remote Device Management)
DMX512, master-slave,
sound or auto operation
DMX recorder and edit function integrated
Shielded input signal protection for stable
signal without interference
3-Pin/5-Pin XLR DMX connectors IN/OUT
Display System
2.4" TFT LCD display
4 Control buttons
180°Reversible for LCD display
Display auto OFF
Cooling System
Advanced cooling system integrated
aluminum and copper with liquid
Efficient low noise self adjusting fan
cooling system
Constant temperature readout and
management function
Over temperature protection management
Power Supply
Electronic supply with active PFC
AC100-240V 50/60Hz
740W Power consumption
Housing
High tension fireproof ABS housing
Skeleton made of
aluminum and steel metal plates
Exterior finish: Black
Installation
Adjustable high tension metal bracket
2*1/4 turn fastener points
1*M12 hole
Another 2*1/4 turn fastener points
available on the body
1*Safety attachment point
Operating Condition
Operating positions:
all (device on floor or fixed to a support)
-25℃ to 45℃ ambient temperature
IP20 protection rating
Compliance
CE
2014/35/EU - Safety of electrical
equipment supplied at low voltage (LVD)
2014/30/EU -
Electromagnetic Compatibility (EMC)
2011/65/EU - Restriction of the use of
certain hazardous substances (RoHS)
Weight
N.W.: 7kg
G.W.: 8.3kg
Dimensions
Product Dimensions:
245(D)*425(W)*240(H)mm
Packing Dimensions:
240(D)*500(W)*340(H)mm
Light Source
Source: 228*3W cold white LEDs, 5700K
64*0.6W 3-in-1 RGB LEDs
Flicker free operation
for broadcast TV and FILM
Life Span: 50000H
The life span may vary depending on
several following factors but not limited to:
Environmental Conditions, Power/Voltage,
Usage Patterns (On-Off Cycling), Control,
and Dimming)
Optics
High resolution and precise optic system
Classic reflector for backlight
160°Projection angle
Strobe Effect
Variable speed multi directional
shutter/strobe effect
Strobe intensity adjustable 0-100%
Strobe duration adjustable 7-650ms
Strobe rate adjustable 0.289-16.67Hz
Dynamic Effect
Effect:
The fixture has two LED arrays:
• The Beam is a high-intensity array that gives powerful strobe and blinder effects
• The Aura gives RGB effects that light up the front of the fixture to complement or contrast with the output
from the Beam.
Strobe effects
The 3000 LED offers strobe effects from the Beam with variable flash rate, flash duration and
intensity. It also offers the following pre-programmed effects:
• Ramp up/down intensity modulation effects
• Random flashes
• Lightning – simulates the instantly recognizable ‘dirty’ flash of a lightning strike
• Spikes – low-intensity light output with high-intensity flashes.
Blinder effects
To obtain a continuous blinder effect, set flash duration to a long value and flash rate to a high frequency
value so that flashes ‘overlap’ and merge into continuous light output.
Aura RGB Color
Extended DMX mode gives control of the Aura. You can set Aura color with independent RGB control and
you can also control overall Aura intensity.
The four different dimming curve options available in the fixture’s control menus apply to both the Beam and
the Aura dimming curves.
Dimming System
0-100% Smooth linear LED dimming
4 Dimming curve modes, linear/square
law/Inv square law/S-curve
Control System
3/4/14 DMX channels USITT DMX-512
RDM available
(Remote Device Management)
DMX512, master-slave,
sound or auto operation
DMX recorder and edit function integrated
Shielded input signal protection for stable
signal without interference
3-Pin/5-Pin XLR DMX connectors IN/OUT
Display System
2.4" TFT LCD display
4 Control buttons
180°Reversible for LCD display
Display auto OFF
Cooling System
Advanced cooling system integrated
aluminum and copper with liquid
Efficient low noise self adjusting fan
cooling system
Constant temperature readout and
management function
Over temperature protection management
Power Supply
Electronic supply with active PFC
AC100-240V 50/60Hz
740W Power consumption
Housing
High tension fireproof ABS housing
Skeleton made of
aluminum and steel metal plates
Exterior finish: Black
Installation
Adjustable high tension metal bracket
2*1/4 turn fastener points
1*M12 hole
Another 2*1/4 turn fastener points
available on the body
1*Safety attachment point
Operating Condition
Operating positions:
all (device on floor or fixed to a support)
-25℃ to 45℃ ambient temperature
IP20 protection rating
Compliance
CE
2014/35/EU - Safety of electrical
equipment supplied at low voltage (LVD)
2014/30/EU -
Electromagnetic Compatibility (EMC)
2011/65/EU - Restriction of the use of
certain hazardous substances (RoHS)
Weight
N.W.: 7kg
G.W.: 8.3kg
Dimensions
Product Dimensions:
245(D)*425(W)*240(H)mm
Packing Dimensions:
240(D)*500(W)*340(H)mm